Know Your Control Panel - Wen 56225i Manual

KNOW YOUR CONTROL PANEL

Become familiar with the functions and capacity of each component on the control panel.
3-in-1 Dial Switch
(CHOKE, RUN, OFF)
Overload
Reset Button
Manual Shut-Off
Switch
Eco-Mode Switch
Parallel Connection Ports
NOTE: When operating a single generator, DO NOT exceed 15A (1800 running watts) on the NEMA 5-20 re-
ceptacles. The NEMA 5-20R capable of connecting devices up to 20A ONLY when two generators are paral-
lel connected (see "PARALLEL OPERATION").
ECO-MODE SWITCH
This generator is equipped with an Eco-Mode Idle Control Switch. Engaging this switch allows the system to
regulate the engine speed and automatically adjust its fuel consumption to match the required load. When
the electrical load changes, the generator engine will automatically speed up and slow down as needed. This
reduces fuel consumption and noise levels, while extending runtime and engine's lifespan.
Keep this switch engaged ONLY when the power load requirement is LESS THAN 1350W (75% of the rated
watts). Do not engage the Eco-Mode Switch when the total load is more than 1350W. The generator engine
must run at full speed to supply power for anything over 1350W.
18
USING THE GENERATOR
OFF
RUN
CHOKE
MANUAL
SHUT OFF
ECO-MODE
PARALLEL CONNECT
ON OFF
AC 120V
RESET
DC 5V
GROUNDING
Low Oil Indicator
Overload Indicator
Output Indicator
AC 120V Duplex
NEMA 5-20R
DC 5V USB Outlet
1A (top)/2.1A (bottom)
Grounding Nut
Fig. 12 - Control Panel