Update Frdm-K64F Board With Daplink Firmware - NXP Semiconductors SE050 Application Note

NXP Semiconductors

3.1.2 Update FRDM-K64F board with DAPLink firmware

AN12398
Application note
Figure 26. FRDM-K64F board SDK imported
Arm Mbed DAPLink is an open-source software project that enables programming and
debugging application software running on Arm Cortex CPUs. DAPLink runs an open-
source bootloader and enables developers with drag-and-drop programming, a serial port
and CMSIS-DAP based debugging.
Note: To debug MCUXpresso project examples, we need to flash FRDM-K64F with
DAPLink firmware. If your FRDM-K64F board already includes DAPLink firmware, you
can skip these steps.
To flash DAPLink firmware, follow these steps:
1. Go to NXP OpenSDA
2. Scroll down and select FRDM-K64F board from the Download - OpenSDA bootlader
and application drop down list as indicated in
All information provided in this document is subject to legal disclaimers.
Quick start guide to SE050 Visual Studio projects
site
Rev. 1.1 — 20 June 2019
534611
AN12398
Figure 27:
© NXP B.V. 2019. All rights reserved.
18 / 36