Anybus CompactCom B40 Network Manual page 29

CIP Objects
Instance Attributes
# Name Access
1 Parameter
Get/Set
Value
2 Get
Link Path Size
3 Link Path Get
4 Descriptor Get
5 Data Type Get
6 Data Size Get
7 Parameter Get
Name String
8 Units String Get
9 Help String Get
10 Minimum Get
Value
11 Maximum Get
Value
12 Default Value Get
13 Scaling Get
Multiplier
14 Scaling Divisor Get
15 Get
Scaling Base
16 Scaling Offset Get
17 Get
Multiplier Link
18 Divisor Link Get
19 Base Link Get
20 Offset Link Get
21 Get
Decimal
Precision
Anybus ® CompactCom ™ B40 Modbus Serial EtherNet/IP Network Guide
Type
Value/Description
Specified in Actual value of parameter
attributes 4, 5 & 6.
This attribute is read-only if bit 4 of Attribute #4 is true
USINT
0007h (Size of link path in bytes)
Packed EPATH 20 A2 25 nn nn 30 05h
(Path to the object from where this parameter's value is retrieved, in this case
the ADI Object)
WORD Bit: Contents:
0 Supports Settable Path (N/A)
1 Supports Enumerated Strings (N/A)
2 Supports Scaling (N/A)
3 Supports Scaling Links (N/A)
4 Read only Parameter (always set)
5 Monitor Parameter (N/A)
6 Supports Extended Precision Scaling (N/A)
USINT
Data type code
USINT Number of bytes in parameter value
SHORT_STRING
Name of the parameter, truncated to 16 chars
SHORT_STRING "" (default string)
SHORT_STRING
(Data type) Minimum value of parameter
The Data Type is defined in attribute 5.
(Data type) Maximum value of parameter
The Data Type is defined in attribute 5.
(Data type) Default value of parameter
The Data Type is defined in attribute 5.
UINT 0001h
UINT
UINT
INT 0000h
UINT
UINT
UINT
UINT
USINT
00h
27 (54)
SCM-1202-131 1.1 en-US