Qos Vlan-Policy; Reset Qos Policy Control-Plane - H3C S5820X Series Acl And Qos Command Reference

qos vlan-policy

Syntax
qos vlan-policy policy-name vlan vlan-id-list { inbound | outbound }
undo qos vlan-policy [ policy-name ] vlan vlan-id-list { inbound | outbound }
View
System view
Default level
2: System level
Parameters
policy-name: QoS policy name, a string of 1 to 31 characters.
vlan-id-list: Specifies a list of up to eight VLAN IDs. A VLAN ID ranges from 1 to 4094. You can input
individual discontinuous VLAN IDs and VLAN ID ranges in the form of start-vlan-id to end-vlan-id where
the start VLAN ID must be smaller than the end VLAN ID. Each item in the VLAN list is separated by a
space.
inbound: Applies the QoS policy to the incoming packets in the specified VLAN(s).
outbound: Applies the QoS policy to the outgoing packets in the specified VLAN(s).
Description
Use the qos vlan-policy command to apply a QoS policy to VLANs.
Use the undo qos vlan-policy command to remove the QoS policy applied to VLANs.
Examples
# Apply the QoS policy test to the inbound direction of VLAN 200, VLAN 300, VLAN 400, and VLAN
500.
<Sysname> system-view
[Sysname] qos vlan-policy test vlan 200 300 400 500 inbound

reset qos policy control-plane

Syntax
reset qos policy control-plane slot slot-number [ inbound ]
View
User view
Default level
1: Monitor level
Parameters
slot slot-number: Clears the statistics of the QoS policy or policies applied to the control plane of the
specified device in the IRF virtual device. The range for the slot-number argument depends on the number
of devices and the numbering of the devices in the IRF virtual device.
inbound: Clears the statistics of the QoS policy applied to the inbound direction of the control plane.
67