Rule (Ethernet Frame Header Acl View) - H3C S5820X Series Acl And Qos Command Reference

name acl6-name: Specifies an IPv6 ACL by its name. The acl6-name argument takes a case insensitive
string of 1 to 63 characters. It must start with an English letter.
Description
Use the reset acl ipv6 counter command to clear statistics for the specified IPv6 ACL or all IPv6 basic and
IPv6 advanced ACLs.
Related commands: display acl ipv6.
Examples
# Clear statistics for IPv6 basic ACL 2001.
<Sysname> reset acl ipv6 counter 2001
# Clear statistics for IPv6 ACL flow.
<Sysname> reset acl ipv6 counter name flow

rule (Ethernet frame header ACL view)

Syntax
rule [ rule-id ] { deny | permit } [ cos vlan-pri | counting | dest-mac dest-addr dest-mask | { lsap lsap-type
lsap-type-mask | type protocol-type protocol-type-mask } | source-mac sour-addr source-mask |
time-range time-range-name ] *
undo rule rule-id [ counting | time-range ] *
View
Ethernet frame header ACL view
Default level
2: System level
Parameters
rule-id: Specifies a rule ID, which ranges from 0 to 65534. If no rule ID is provided when you create an
ACL rule, the system automatically assigns it a rule ID. This rule ID takes the nearest higher multiple of the
numbering step to the current highest rule ID, starting from 0. For example, if the rule numbering step is
5 and the current highest rule ID is 28, the rule is numbered 30.
deny: Denies matching packets.
permit: Allows matching packets to pass.
cos vlan-pri: Matches an 802.1p priority. The vlan-pri argument can be a number in the range 0 to 7, or
in words, best-effort (0), background (1), spare (2), excellent-effort (3), controlled-load (4), video (5),
voice (6), or network-management (7).
counting: Counts the number of times the IPv4 ACL rule has been matched in hardware.
dest-mac dest-addr dest-mask: Matches a destination MAC address range. The dest-addr and dest-mask
arguments represent a destination MAC address and mask in H-H-H format.
lsap lsap-type lsap-type-mask: Matches the DSAP and SSAP fields in LLC encapsulation. The lsap-type
argument is a 16-bit hexadecimal number that represents the encapsulation format. The lsap-type-mask
argument is a 16-bit hexadecimal number that represents the LSAP mask.
type protocol-type protocol-type-mask: Matches one or more protocols in the Ethernet frame header. The
protocol-type argument is a 16-bit hexadecimal number that represents a protocol type in Ethernet_II and
18