Remark Qos-Local-Id - H3C S5820X Series Acl And Qos Command Reference

View
Traffic behavior view
Default level
2: System level
Parameters
green: Specifies green packets.
red: Specifies red packets.
yellow: Specifies yellow packets.
local-precedence: Sets the local precedence to be marked for packets, which ranges from 0 to 7.
Description
Use the remark local-precedence command to configure a local precedence marking action.
Use the undo remark local-precedence command to delete the action.
Related commands: qos policy, traffic behavior, and classifier behavior.
Examples
# Configure traffic behavior database to mark matching traffic with local precedence 2.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark local-precedence 2

remark qos-local-id

Syntax
remark qos-local-id local-id-value
undo remark qos-local-id
View
Traffic behavior view
Default level
2: System level
Parameters
local-id-value: QoS-local ID to be marked for packets, which ranges from 1 to 4095. The local QoS IDs
supported on the S5800 Switch Series and the S5820X Switch Series are from 1 to 3999.
Description
Use the remark qos-local-id command to configure the action of setting the specified QoS-local ID for
packets.
Use the undo remark qos-local-id command to remove the action.
Related commands: qos policy, traffic behavior, and classifier behavior.
Examples
# Configure the action of marking packet with QoS-local ID 2.
<Sysname> system-view
51