Display Acl Ipv6 - H3C S5820X Series Acl And Qos Command Reference

Hide thumbs Also See for S5820X Series:
Table of Contents

Advertisement

Field
named flow
3 rules
match-order is auto
Statistics is enabled
ACL's step is 5
rule 0 permit
5 times matched
rule 10 comment This rule is used in
VPN rd.

display acl ipv6

Syntax
display acl ipv6 { acl6-number | all | name acl6-name } [ slot slot-number ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
acl6-number: Specifies an IPv6 ACL by its number:
2000 to 2999 for IPv6 basic ACLs
3000 to 3999 for IPv6 advanced ACLs
all: Displays information for all IPv6 ACLs.
name acl6-name: Specifies an IPv6 ACL by its name. The acl6-name argument takes a case insensitive
string of 1 to 63 characters. It must start with an English letter.
slot slot-number: Displays ACL rule match statistics on an IRF member switch. The slot-number argument
represents the member ID of the device in the IRF virtual device. Available values for the slot-number
argument are member IDs already assigned in the IRF virtual device. You can use the display irf
command to display information about the member switches in an IRF virtual device.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
Description
The name of the ACL is flow. "-none-" means the ACL is not named.
The ACL contains three rules.
The match order for the ACL is auto, which sorts ACL rules in depth-first
order. This field is not present when the match order is config.
The rule match counting is enabled for this ACL.
The rule numbering step is 5.
Content of rule 0
There have been five matches for the rule. If the counting keyword is
configured for the rule or the hardware-count enable command is
enabled for the ACL, the statistic counts both rule matches performed
in both software and hardware. Otherwise, the statistics counts only
rule matches performed in software.
The description of ACL rule 10 is "This rule is used in VPN rd."
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

S5800 series

Table of Contents