Step - H3C S5820X Series Acl And Qos Command Reference

[Sysname] acl number 2000
[Sysname-acl-basic-2000] display this
#
acl number 2000
rule 0 permit source 14.1.1.0 0.0.0.255
rule 5 permit source 10.1.1.1 0 time-range work-time
rule 10 permit source 192.168.0.0 0.0.0.255
rule 15 permit source 1.1.1.1 0
rule 20 permit source 10.1.1.1 0
rule 25 permit counting
#
return
# To identify rules 10, 15, 20, and 25, add a start remark with rule ID 7, and an end remark with rule ID
27.
[Sysname-acl-basic-2000] rule 7 remark Rules for VIP_start
[Sysname-acl-basic-2000] rule 27 remark Rules for VIP_end
# Display the rules in ACL 2000.
[Sysname-acl-basic-2000] display this
#
acl number 2000
rule 0 permit source 14.1.1.0 0.0.0.255
rule 5 permit source 10.1.1.1 0 time-range work-time
rule 7 remark Rules for VIP_start
rule 10 permit source 192.168.0.0 0.0.0.255
rule 15 permit source 1.1.1.1 0
rule 20 permit source 10.1.1.1 0
rule 25 permit counting
rule 27 remark Rules for VIP_end
#
return
The output shows that the start remark is before rule 10, and the end remark is after rule 25. These two
remarks clearly identify the purpose of the four rules.

step

Syntax
step step-value
undo step
View
IPv4 basic/advanced ACL view, IPv6 basic/advanced ACL view, Ethernet frame header ACL view
Default level
2: System level
Parameters
step-value: ACL rule numbering step, which ranges from 1 to 20.
31