Table 20: Frequently Asked Questions - Siemens SIMATIC NET CP 243-1 Technical Manual

Communications processor for industrial ethernet

Hide thumbs Also See for SIMATIC NET CP 243-1:

Table of Contents

SIMATIC NET – Support and training

Additional support

If you have any further questions on SIMATIC NET products, please contact your

Siemens partner in the branch office responsible for your area.

The addresses are found:

• in our IK PI catalog

• in the Internet

http://www.siemens.de/automation/partner

• in the Interactive Catalog CA01

http://www.siemens.de/automation/ca01

• on the Quickstart CD

Internet

You will find additional detailed information on using the CP described in this man-

ual on the Internet under:

By entering the following Article IDs, you can call up current information (FAQ -

Frequently Asked Questions). At the time of printing of this handbook, the following

articles of relevance for this CP were available:

Article ID

2073614

6810459

Table 20: Frequently asked questions

http://www.ad.siemens.de/csi/net

Assigning the subnet masks of IP addresses in the "Subnetting" oper-

ating mode in the IP memory address space

Settable range of "Keep Alive" time intervals for Industrial Ethernet

CPs (V1.1.0 and higher).

Topic / question

J31069-D0428-U001-A1-7618

09/02

CP 243-1

Table of Contents