Table of Contents
Advertisement
Safety-related information on the product
Before using the product described here, it is imperative that you observe the fol-
lowing safety-related information.
Qualified personnel
The equipment may be commissioned and operated by qualified personnel only.
For the purposes of the safety instructions in this instruction manual, a Qualified
Person is one who is authorized to commission, ground and label devices, systems
and circuits in accordance with accepted safety standards.
Intended use of hardware products
Please observe the following information regarding the intended use of hardware
products:
Caution
The device may only be used in applications as provided for in the catalog and in the
technical description, and only in connection with non-Siemens products and compo-
nents that have either been recommended or approved.
Successful and safe operation of this equipment is dependent on proper transport,
handling, storage, erection and installation, as well as careful operation and mainte-
nance.
Before using the supplied sample programs or programs that you created yourself,
ensure that running systems cannot endanger persons or damage machines.
EG regulation: Commissioning is prohibited until it has been established that the ma-
chine into which this component is to be installed is in compliance with the regulations
of the 89/392/EWG directive.
Advertisement
Table of Contents
