Bit 2 = Unused; Byte Bit 3 = Alarm_Enabled; Bit 5 = Unused Bit 6 = Unused; Bit 7 = Unused - Toshiba TOSVERT VF-PS1 Series Function Manual

4.3.1.

Analog Input Attribute

Table 5 Analog Input Attribute Table
Attribute
10
11
12
13
14
* Added shading functions are not supported (The response is "N10").
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Type
Object Configuration
Bit 0 = COS_enabled (1)
Bit 1 = unused

Bit 2 = unused

1 Byte Bit 3 = alarm_enabled (1)
Bit 4 = warning_enabled (1)
Bit 5 = unused
Bit 6 = unused

Bit 7 = unused

Object Status
Bit 0 = reliable (0) / unreliable (1)
Bit 1 = override active (1)
Bit 2 = out of range - high (1)
Bit 3 = out of range - low (1)
Bit 4 = COS status
Bit 5 = COS status
Bit 6 = COS status
2 Byte where Bits 4,5,6 are:
Bit 7 = unused
3 Float Analog Input Value
4 Float Linear Ranging Parameter 1 (JCI use only)
5 Float Linear Ranging Parameter 2 (JCI use only)
6 Float Linear Ranging Parameter 3 (JCI use only)
7 Float Linear Ranging Parameter 4 (JCI use only)
8 Float Low Alarm Limit
9 Float Low Warning Limit
Float High Warning Limit
Float High Alarm Limit
Float Differential
Integer Filter Weight (JCI use only)
Float AI_Offset (JCI use only)
Contents
000 = normal
001 = trouble (JCI use only)
010 = not available
011 = low warning
100 = low alarm
101 = high warning
110 = high alarm
- 14 -
E6581540