Connecting The Sprayer; Drawbars; Mounting The Drawbar Hitch; Drawbar Hitch Height Adjustment - Hardi COMMANDER Plus Series Operator's Manual

Connecting the sprayer

Drawbars

Mounted on the frame in a center pivot, the drawbar
can be either standard fixed or optionally steered. The
steering drawbar is hydraulically operated.
Overview - Drawbar systems
COMMANDER
DRAWBAR
750
1200
The following hitch types are available:
Overview - Hitch types
Hitch
Commander
type
Swivel type Ø36
Clevis type Ø33
Swivel type Ø42
Clevis type Ø42
Swivel type
Clevis type
10
Sprayer setup
FIXED STEERING
DRAWBAR
YES YES
YES YES
Commander
750 1200
Yes No
No
Yes
Yes
No
Yes
No
®
HARDI COMMANDER

Mounting the drawbar hitch

The drawbar hitch is inserted into
the opening of the drawbar,
fastened by two pins through
the two holes A and secured
by two roll pins.

Drawbar hitch height adjustment

The drawbar hitch may be inverted for height adjust-
ment. Remove the two pins (A) and the P.T.O. support
bracket. Invert the drawbar hitch and replace the two
pins (A) and P.T.O. support bracket.

Support jack

The support jack is stored upside-down in the bracket
on the sprayer's right side when the sprayer is attached
to the tractor.
To remove the support jack from the drawbar hitch: Lift
the leg, remove the linch pin and pull out the support
jack. The support jack can then be mounted to the
storage bracket and secured by the linch pin.
OPERATOR'S MANUAL
A