Description; Identification Plate; Sprayer Use - Hardi MARRO TWIN FORCE 1000 Instruction Book

Table of Contents

Advertisement

Description

Description
Description
Description
Description
Frame
Strong and compact frame which has a strong chemical
and weather resistant electrostatic lacquer coat.
Screws, nuts, etc. have been DELTA-MAGNI treated to
be resistant to corrosion.
Front tank
UV-resistant Polyethylene in a suitable design with no
sharp corners for easy agitation, emptying, and cleaning.
Nominal contents: 1000 l or 1300 l.
Pump
Diaphragm pump with 6 diaphragms, model 463, with
easily accessible valves and diaphragms. Standard =
540 r.p.m, optional = 1000 r.p.m.
MANIFOLD SYSTEM
All functions of the spray circuits are operated via the
centrally situated MANIFOLD valves with colourcoded
plates and pictorial symbols for easy operation.
Operating unit
The operating unit is constructed of modules and con-
sists of main ON/OFF valve, pressure gauge, pressure
regulation with built-in HARDI-MATIC and distribution
valves with pressure equalization. HARDI-MATIC en-
sures a constant volume per hectare of the liquid (l/ha)
at varying forward speed within the same gear when the
number of P.T.O. revolutions are between 300-600 r/min
(for pump/540 r.p.m.) or 650-1100 r/min (for pump/1000
r.p.m.).
The operating unit is fully electrically controlled (EC) via
remote control box.
Filters
With the self-cleaning filter the impurities that exist in the
spray liquid will by-pass the filter and be recirculated
back to the tank via the return flow. Also suction filter
and nozzle filters are standard. In-line pressure filters
can be fitted as option.
Boom
The sprayer is equipped with a HAZ boom, avaliable in
18, 20, 21 and 24 m working width. The boom is sus-
pended in a strong, stable parallelogram boom lift and is
fully hydraulically operated, including boom slanting
control and air slot angling. The HAZ boom has Direct
Acting Hydraulics (D.A.H) and individual boom tilt
function as well.
All boom widths can spray 12 m with outer sections
folded.
The TWIN blowers are driven by a built-in hydrostatic
transmission, powered via the tractor P.T.O. Blower
speed can be adjusted stepwise from the tractor cabin.
6

Identification plate

An identification plate fitted on the frame indicates model
and serial no. Boom centre frame, and inner/outer
sections also have identification plates indicating boom
type and part number of spare parts. If ordering spare
parts, inform your dealer of these, so the right model and
version are described.
Spr
Spr
Spra a a a a y y y y y er use
Spr
Spr
er use
er use
er use
er use
The HARDI COMMANDER sprayer is for the application
of crop protection chemicals and liquid fertilisers.
The equipment must only be used for this purpose. It is
not allowable to use the sprayer for other purposes.
If no local law demands that the operator must be
certified to usespray equipment, it is strongly recom-
mended to be trained in correct plant protection and in
safe handling of plant protection chemicals to avoid
unnecessary risk for persons and the environment when
doing your spray job.
GB 04 01 01
T021-0018
T279-0002

Advertisement

Table of Contents
loading

This manual is also suitable for:

Marro twin force 1300

Table of Contents