Table of Contents
Advertisement
General information
General View
The SARITOR is divided into 3 zones: a Clean zone, a Working zone and a
Spraying zone, referring to the level of possible chemical contamination.
The functions and features are listed by zones below. Please note that
some of the features are optional equipment.
A. Clean Zone
Engine
Working platform with ladder
Cabin
Valve for hand washing
Access to Main tank
B. Working Zone
Tank level indicator
Multipath Valves
FastFiller coupler
ChemFiller
C. Spraying Zone
Boom lift, up/down
Boom
Nozzles
Mudguards
Suspension
Sprayer use
The HARDI® sprayer is for the application of crop protection chemicals and liquid fertilizers. The equipment must only be
used for this purpose. It is not allowable to use the sprayer for other purposes. If no local law demands that the operator
must be certified to use spray equipment, it is strongly recommended to be trained in correct plant protection and in safe
handling of plant protection chemicals to avoid unnecessary risk for persons and the environment when doing your spray
job.
Sprayer identification plates
Frame
Very strong and compact frame which also has a strong chemical and weather resistant electrostatic lacquer coat. The
hardware is either stainless steel or treated to be resistant to corrosion. The front and rear suspension is provided by a
pneumatic system.
Tanks
The main tank is made of impact-proof, UV-resistant and chemical resistant polyethylene. It has a purposeful design with no
sharp corners for easy cleaning. Nominal content: 1100 gallons (4000 liters) or 1300 gallons (5000 liters). A large, easy to read
tank level indicator is placed beside the platform and is visible from the cabin. The filling hole is placed so it can be accessed
from the platform. The SARITOR is standard equipped with a 150 gallon (575 liter) rinse tank, and a 26 gallon (100 liter) clean
water tank (hand washing tank).
3 - Description
15
Advertisement
Table of Contents
