Filling With External Quick Fill (Optional); Filling Of Clean Water Tank - Hardi COMMANDER Plus Series Operator's Manual

3. Filling with external Quick Fill (optional)

Main tank Quick Fill coupler
Flush tank Quick Fill coupler
The Quick Fill is operated as follows:
1. Remove the plug from the quick fill coupler for the
tank you wish to fill (main tank or flush tank).
2. Fit the external water supply hose to the quick
coupler on the trailer.
3. Fill tank to desired level.
WARNING: Do not leave the sprayer while filling
the tank, and keep an eye on the tank level sight
gauge in order NOT to overfill the tank!
4. Remove external water supply hose from the quick
coupler.
5. Replace the plug on the quick coupler.
Note: Observe local legislation regarding use of Quick
Filling Device. In some areas it is prohibited to fill from
open water reservoirs (lakes, rivers, etc.). It is recom-
mended only to fill from closed reservoirs (mobile water
tank, etc.) to avoid contamination.
WARNING! IF SUCTION HOSE/FILTER IS
CARRIED ON THE SPRAYER, IT CAN BE
CONTAMINATED BY SPRAY DRIFT WHICH
WILL BE TRANSFERRED TO WATER SUPPLY
WHEN FILLING.
Operation
®
HARDI COMMANDER
A water level indicator for the flush tank (clear hose
with floating ball) is situated beneath the platform.

4. Filling of clean water tank

The clean water tank is integrated in the platform and
has a capacity of 8 gallons (30 liters). Access to the
tank lid is possible from the platform. Fill this tank with
clean water only.
The water from this tank is for hand washing, cleaning
of clogged nozzles etc. The tap is located within reach
from the MANIFOLD valves and is opened/closed by a
tap handle.
WARNING! Although the clean water tank is
only filled with clean water, it must never be
used for drinking.
OPERATOR'S MANUAL 27