Using A Wall-Mount Bracket - Sony BRAVIA XBR KDL-46XBR10 Operating Instructions Manual

Using a Wall-Mount Bracket

All models can be mounted to a wall using the Wall-Mount Bracket (not supplied) out of the box
as packaged.
Prepare the monitor for the Wall-Mount Bracket before making cable connections.
Sony strongly recommends that you use the Wall-Mount Bracket model designed for your
monitor (see page 49) and that wall-mounting of your monitor should be performed by a
Sony dealer or licensed contractor.
• Follow the instruction guide provided with the Wall-Mount Bracket for your model. You
may also need to refer to the online Reference Book for additional information for your
unit model. Sufficient expertise is required in installing this monitor, especially to
determine the strength of the wall for withstanding the monitor's weight.
• Be sure to use the screws supplied with the Wall-Mount Bracket when attaching the
mounting hooks to the monitor. (Do not use the screws that are intended for the Table-Top
Stand attachment.)
The supplied M6 screws are designed so that they are 8 mm to 12 mm in length when
measured from the attaching surface of the mounting hook.
Use of screws other than those supplied with the bracket may result in internal damage to
the monitor or cause it to fall, etc.
When attaching to the Wall-Mount Bracket
8-12 mm
When attaching to the Floor Stand
8-12 mm
• Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready
to attach the Table-Top Stand. Keep the screws away from small children. When you are
using the Table-Top Stand, be sure to read page 19.
8
Spacer (black)
Screw M6 × 16 (supplied with the Wall-Mount Bracket)
Mounting Hook
Rear of the monitor
Spacer (silver)
Screw M6 × 20 (supplied with the monitor)
Mounting Hook
Rear of the monitor