Installing the Accessories (Wall-Mount Bracket)
For product protection and safety reasons, Sony strongly recommends that installing of your
monitor be performed by Sony dealers or licenced contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this
Your monitor can be installed using the Wall-Mount Bracket SU-WL500/SU-WL700 (sold
separately). For SU-WL500, install as illustrated below. For SU-WL700, see the manual supplied
• Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the
• Refer to "Detaching the Table-Top Stand from the Monitor" (page 11).
• Refer to "Monitor installation dimensions table" (page 45).
• Refer to "Screw and Hook locations diagram/table" (page 45).
Sufficient expertise is required for installing this product, especially to determine the strength of the wall for
withstanding the monitor's weight. Be sure to entrust the attachment of this product to the wall to Sony
dealers or licenced contractors and pay adequate attention to safety during the installation. Sony is not liable
for any damage or injury caused by mishandling or improper installation.
(+PSW6 × 16)