Unit Controls and Indicators
Monitor
Media receiver
Item
1 PIC OFF/
TIMER
indicator
2 HD SIGNAL
indicator
3 POWER/
STANDBY
indicator
4 Light Sensor
(IR) Infrared
Receiver
5 HOME
6
INPUT
7 – VOLUME +
8 – CHANNEL + Press to scan through channels. To scan quickly through channels, press and hold
9 POWER
0 Speaker
qa LINK indicator Lights up when the wireless connection between the media receiver and monitor is stable.
26
1
9
Description
Lights up in orange when the Timer or Sleep Timer is set. Lights up and/or blinks
in orange during a software upgrade.
Lights up in green when the Power Saving is set to Picture Off.
Lights up when the unit receives HD signal including up converted signals.
Lights up in red when your unit is in PC power saving mode or during the software
upgrade. Lights up in green when the unit is turned on. If the LED blinks in red
continuously, this may indicate that the unit needs servicing (see Sony Customer
Support information on the front cover).
Senses room light level and adjusts the screen brightness accordingly. Do not put anything
near the sensor or the nearby general area (as shown above), as its function may be affected.
Receives IR signals from the remote control. Do not block this area, as it may
interfere with remote control operation.
Press to display TV Home Menu/XMB
and network related content.
Press to display the list of inputs or confirm your selection. Press repeatedly to toggle
through the inputs.
~
• Inputs can be changed by pressing V/v and
• See page 44 for information about setting up the external inputs labels.
In the MENU screen, this button serves to confirm the selection or setting.
Press to adjust the volume. In the MENU screen, these buttons serve as left/right buttons.
down either +/–. In the MENU screen, these buttons serve as up/down buttons.
Press to turn on and off the unit.
Outputs audio signal.
2
5
6
9
q;
POWER
STANDBY
3
to access unit Settings and other media
™
3
4
7
8
PIC OFF / TIMER
3
1
while the list of external inputs is displayed.
LINK
qa