Faqs; Additional Information; Fault Finding - Bibby Sterilin Techne No ICE Operator's Manual

Q1 How can I cool the beads more quickly?
A1 If you intend to use the N o Ice to keep samples cool, then the bucket and beads can be
stored in a refrigerator and then inserted into the unit when required.
Q2 Is it possible to sterilise the beads?
A2 yes. place the beads in a suitable container and autoclave as you would for sterilising other
equipment. the beads can be autoclaved at up to 134°c.
If you require further technical or application assistance please contact Techne at:
E-mail: technehelp@bibby-scientific.com
Phone: +44 (0)1785 810433
Fax: +44 (0)1785 810405
For servicing information please contact:
Bibby Scientific Ltd.
Service Department
Beacon Road
Stone
Staffordshire
ST15 0SA
E-mail: service@bibby-scientific.com
Phone: +44 (0)1785 810475
Fax: +44 (0)1785 810405
We are continually striving to improve our products and software. If you have any comments and
suggestions on how we can do things better please send them to us at: techne@bibby-scientific.com
Note that this equipment should only be dismantled by properly trained personnel. Removing
the outer cover exposes potentially lethal mains voltages. There are no user serviceable parts within this
equipment.

fault fINdINg

Should you have any problems with your Nº ICE which cannot be easily remedied, you should contact
your supplier and return the unit if necessary. Please include details of the fault observed and remember
to return the unit in its original packing. Bibby Scientific Ltd. accepts no responsibility for damage to units
which are not properly packed for shipping: if in doubt, contact your supplier, giving the full serial number
of the unit.
faQ's

addItIoNal INformatIoN

19