Table of Contents
Advertisement
GRATING SPECTROPHOTOMETER OPERATING MANUAL
After black calibration finished, it will automatically enter the main menu,
follow the menu to do correspond operations, and click
"Standard Measurement".
2.3 Measurement
2.3.1 Measurement Instruction
As shown in Figure 7, 8, 9, it is working condition area at the top of
measurement interface, displaying the status of measurement mode
(SCI/SCE), Bluetooth and UV conditions. At the left side, it is shortcut
display, it could switch different modes by pressing different icons. At the
middle, it displays different chromatic data according to different setting
of color formula. It is operation buttons area at the bottom, which could
operate the data by pressing the different buttons.
Figure 6 Black Calibration
7
back to
Advertisement
Table of Contents
