Table of Contents
Advertisement
GRATING SPECTROPHOTOMETER OPERATING MANUAL
conditions. In the light source setting interface, it can set the standard
observer angle, standard light source and UV light source (different
model has different configuration).
In the main menu interface, click "light source setting" to enter the light
source setting interface, as shown in Figure 33.
Click "Observer Angle" to switch 10 degree or 2 degree. 10 degree is
CIE1964 standard, while 2 degree is CIE1931 standard.
Click "Light Source", as shown in Figure 34, users could select D65, A, C,
D50, D55, D75, F1, F2(CWF), F3, F4, F5, F6, F7(DLF), F8, F9,
F10(TPL5), F11(TL84), F12(TL83/U30).
Click "UV Light Source" to select the UV light source switch. 100%
means UV light on while 0% means off. It is recommended to turn on the
Figure 33 Light Source
31
Advertisement
Table of Contents
