Emerson 1410H Quick Start Manual page 25

February 2019
3. The equipment is not capable of withstanding the 500V electrical strength
test as defined in clause 6.5.1 of EN 60079-15: 2010. This must be taken into
account during installation.
4. When fitted, the surface resistivity of the remote antenna is greater than
1G. To avoid electrostatic charge build up, it must not be rubbed with a dry
cloth or cleaned with solvents.
International
N7 IECEx Type n
Certificate
Standards
Markings
Special Conditions for Safe Use (X):
1. The equipment must be installed in an area of not more than Pollution
Degree 2 as defined in IEC 60664-1, and in an enclosure that provides a
degree of protection of at least IP54 and meets the relevant requirements of
EN 60079-0 and EN 60079-15.
2. External connections to the equipment must not be inserted or removed
unless either the area in which the equipment is installed is known to be
nonhazardous, or the circuits connected have been de-energised.
3. The equipment is not capable of withstanding the 500V electrical strength
test as defined in clause 6.5.1 of EN 60059-15: 2010. This must be taken into
account during installation.
4. When fitted, the surface resistivity of the remote antenna is greater than
1GΩ. To avoid electrostatic charge build-up, it must not be rubbed with a dry
cloth or cleaned with solvents.
• Currently not available for 1410H option.
Quick Start Guide
IECEx BAS 14.0067X
IEC 60079-0: 2011, IEC 60079-15: 2010
Ex nA IIC T4 Gc, T4(-40 °C ≤ Ta ≤ +75 °C), V
Quick Start Guide
= 30Vdc
MAX
25