Table Of Contents - Emerson 1410H Quick Start Manual

Quick Start Guide
Safety messages
NOTICE
This guide provides basic guidelines for the Emerson
instructions for diagnostics, maintenance, service, or troubleshooting. Refer to the Emerson Wireless
Gateway 1410H Reference Manual for more information and instructions. The manuals and this guide
are available electronically on Emerson.com/Rosemount.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions.
This device may not cause harmful interference. This device must accept any interference received,
including interference that may cause undesired operation. This device must be installed to ensure a
minimum antenna separation distance of 20 cm from all persons.
WARNING
Explosion hazard.
Do not make or break any connections to the Gateway while circuits are live unless area is known to be
non-hazardous.
Explosions could result in death or serious injury.
Installation of device in an explosive environment must be in accordance with appropriate local,
national, and international standards, codes, and practices.Review the Product Certifications section
for any restrictions associated with a safe installation.
Avoid contact with the leads and terminals. High voltage that may be present on leads can cause
electrical shock.
Potential electrostatic charging hazard.
The Gateway enclosure is plastic. Use care in handling and cleaning when in explosive environments to
avoid an electrostatic discharge.
Contents
Wireless planning...........................................3
PC requirements............................................ 4
Initial connection and configuration...............5
Physical installation......................................13
2
™
Wireless 1410H Gateway. It does not provide
Software installation (optional)....................21
Verify operations......................................... 22
Product certifications...................................23
February 2019
Emerson.com/Rosemount