Verify Operations - Emerson 1410H Quick Start Manual

Quick Start Guide
6

Verify operations

Operation is verified through the web interface by opening a web browser
from any PC on the host system network and entering the Gateway IP address
or DHCP host name in the address bar. If the Gateway has been connected
and configured properly, the security alert will be displayed followed by the
log in screen. This will need to be done for both networks.
Figure 6-1: Gateway Log In Screen
The Gateway is now ready to be integrated into the host system. Make sure
the field devices to be used with each network have the Network ID and Join
Key that is on the Gateway (found on the Network Setting page). Once the
field devices are powered, they will appear on the wireless network and
communications can be verified under the Explore tab using the web
interface. The time needed for the network to form will depend on the
number of devices.
22
February 2019
Emerson.com/Rosemount