Installation On Ceiling Fan Cf921 - Emerson AL200 Owner's Manual

4. Installation for Ceiling Fan CF921
4.1
Remove the three Coupler Cover Screws and slide the
Coupler Cover up the Downrod for installation of LED
Accent Light Fixture (Figure 4).
Retain the three Screws for reinstallation of Coupler
Cover (Steps 4.4 & 4.5). (Figure 4).
4.2
Position the LED Accent Light Fixture so that the
Downrod passes through the opening of the LED
Accent Light Fixture (Figure 5).
Align the Mounting Holes of the LED Accent Light
Fixture to the Motor Housing Assembly (Figure 5).
NOTE: Be sure the LED Accent Light Fixture
Connector is located close to the Motor Housing
Assembly Connector for ease of installation.
Install the LED Accent Light Fixture to the Motor
Housing Assembly using the three #8-32 Pan Head
Screws (supplied) (Figure 5).
WARNING
!
To avoid possible fire or electric shock, be careful not
to pinch wires under the LED Accent Light Fixture
during assembly.
COUPLER COVER
SCREWS (3)
(RETAIN FOR LATER
INSTALLATION)
COUPLER COVER
MOTOR HOUSING
ASSEMBLY
Figure 4
#8-32 PAN HEAD
SCREWS (3)
LED ACCENT
LIGHT FIXTURE
LIGHT FIXTURE
MOUNTING
HOLES (3)
MOTOR
HOUSING
ASSEMBLY
Figure 5
Please contact 1-800-654-3545 for further assistance
5
emersonfans.com
U.L. Model No.: AL200