Emerson AL200 Owner's Manual page 6

4. Installation for Ceiling Fan CF921 (continued)
4.3
Securely engage the LED Accent Light Fixture Female
2-Pin Connector with the Motor Housing Assembly
Male 2-Pin Connector (Figure 6).
For storage of excess Connector Wire, tuck the
Connector Wire along the inside edge of the LED
Accent Light Fixture and along the Wire Channel
leading towards the Downrod. (Figure 6).
4.4
Carefully tuck the LED Accent Light Fixture Connector
and Wires close to the Motor Housing Coupler.
Slide the Coupler Cover down the Downrod with all
Wires and Connectors inside the Coupler Cover
(Figure 7).
NOTE: Be sure LED Accent Light Fixture Wires are
positioned close to the Motor Housing Coupler to
avoid pinching of the Wires during installation of
Coupler Cover.
4.5
CAUTION: Before installing and tightening the
screws, be sure there are no wires pinched
between the LED Accent Light Fixture, Motor
Housing Assembly and Coupler Cover.
Reinstall the three Coupler Cover Screws (previously
removed in Step 4.1) to secure the Coupler Cover
(Figure 8).
WARNING
!
To avoid possible fire or electric shock, be careful not
to pinch wires between coupler cover and the motor
housing assembly.
CONNECTOR
WIRE STORAGE
LIGHT FIXTURE
FEMALE 2-PIN
CONNECTOR
MOTOR HOUSING
ASSEMBLY MALE
2-PIN CONNECTOR
Figure 6
COUPLER
COVER
DOWNROD
MOTOR
HOUSING
COUPLER
Figure 7
COUPLER COVER
COUPLER COVER
SCREWS (3)
MOTOR HOUSING
ASSEMBLY
Figure 8
6
WIRE CHANNEL
U.L. Model No.: AL200