Slow Speed (P012) - Siemens SITRANS WM300 MFA Operating Instructions Manual

Parameter assignment
6.5 Slow speed
6.5.4

Slow speed (P012)

For relay output Q4
Under speed setpoint indicates when the process speed of the target device has decreased
below a safe working speed/rotation. Enter the number of seconds between pulses in an
under speed situation.
● P012 = xxx seconds
Values
40
Setpoint 00:00:xx (HH:MM:SS)
range 0 ... 399s then resets back to 0
Input I4 – Under Speed alarm output relay Q4
SITRANS WM300 MFA
Operating Instructions, 08/2018, A5E45090709-AA