Slow Speed (P011) - Siemens SITRANS WM300 MFA Operating Instructions Manual

Values
6.5.3

Slow speed (P011)

For relay output Q1
Over speed setpoint indicates when the process speed of the target device has increased
past a safe working speed/rotation within the process. Enter the number of seconds between
pulses in an over speed situation.
● P011: xxx seconds
Values
SITRANS WM300 MFA
Operating Instructions, 08/2018, A5E45090709-AA
Setpoint 00:00:xx (HH:MM:SS)
range 0 ... 399s then resets back to 0
Input I3 – Under speed alarm output relay Q3
Setpoint 00:00:xx (HH:MM:SS)
range 0 ... 399s then resets back to 0
Input I3 – Over Speed alarm output relay Q1
Parameter assignment
6.5 Slow speed
39