GE AF-60 LP Programming Manual page 9

The small digits to the left are the selected
3
The large digits in the middle of the display show the
parameter.
The right side of the display shows the
can be either Hz, A, V, kW, HP, %, s or RPM.
Motor direction is shown to the bottom left of the display - indicated by a
small arrow pointing either clockwise or counterclockwise.
Use the [MENU] key to select one of the following menus:
Status Menu:
The Status Menu is either in Readout Mode or Hand Mode. In Readout Mode the value of the currently selected readout parameter is shown in the display.
In Hand Mode the local Keypad reference is displayed.
Quick Menu:
Displays Quick Menu parameters and their settings. Parameters in the Quick Menu can be accessed and edited from here. Most applications can be run by setting
the parameters in the Quick Menus.
Main Menu:
Displays Main Menu parameters and their settings. All parameters can be accessed and edited here. A parameter overview is found later in this manual.
Indicator lights:
• Green LED: The frequency converter is on.
• Yellow LED: Indicates a warning. Please see section Troubleshooting
• Flashing red LED: Indicates an alarm. Please see section Troubleshooting
8
parameter number.
value of the selected
unit of the selected parameter. This
AF-60 LP™ Micro Drive Programming Guide
Illustration 3.4: Indicating selected par. no.
Illustration 3.5: Indicating value of selected par.
Illustration 3.6: Indicating unit of selected par.
Illustration 3.7: Indicating motor direction