GE AF-60 LP Programming Manual page 53

[5] Not and
[6] Not or
[7] Not and not
[8] Not or not
13-44 Logic Rule Boolean 3
Array [4]
4.10.6. 13-5* States
4
Parameters for programming the Logic Controller.
13-51 Logic Controller Event
Array [20]
13-52 LC Controller Action
Array [20]
Disabled
*
[0]
[1] No Action
[2] Select Set-up1
[3] Select Set-up2
[10] SelectPresetRef0
[11] SelectPresetRef1
[12] SelectPresetRef2
[13] SelectPresetRef3
[14] SelectPresetRef4
[15] SelectPresetRef5
[16] SelectPresetRef6
[17] SelectPresetRef7
[18] SelectRamp1
[19] SelectRamp2
[22] Run
[23] RunReverse
[24] Stop
[25] Qstop
[26] DCstop
[27] Coast
[28] Freeze Output
[29] StartTimer0
[30] StartTimer1
[31] StartTimer2
[32] SetDO42Low
[33] SetRelayLow
[38] SetDO42High
52
Evaluates expression NOT [13-40/13-42] and [13-44].
Evaluates expression NOT [13-40/13-42] OR [13-44].
Evaluates expression NOT [13-40/13-42] AND NOT [13-44].
Evaluates expression NOT [13-40/13-42] OR NOT [13-44].
Select third boolean input for selected logic rule.
See par. 13-40 for choices and descriptions.
Select boolean input to define Logic Controller Event.
See par. 13-40 for choices and descriptions.
Select action corresponding to LC event. Actions are executed when corresponding event (par. 13-51) is evaluated as
True.
Function is disabled.
No action is taken.
Changes active set-up to Set-up 1.
Changes active set-up to Set-up 2.
Selects preset reference 0
Selects preset reference 1
Selects preset reference 2
Selects preset reference 3
Selects preset reference 4
Selects preset reference 5
Selects preset reference 6
Selects preset reference 7
Selects ramp 1
Selects ramp 2
Issues start command to frequency converter.
Issues start reverse command to frequency converter.
Issues stop command to frequency converter.
Issues quick stop command to frequency converter.
Issues DC stop command to frequency converter.
Frequency converter coasts immediately. All stop commands including coast command stop the Logic Controller.
Freezes output frequency.
Starts timer 0.
Starts timer 1
Starts timer 2
Set Digital output 42 low.
Set Relay low.
Set Digital output 42 high.
AF-60 LP™ Micro Drive Programming Guide