GE AF-60 LP Programming Manual page 14

Auto: In Auto-mode the frequency converter can be remote controlled (bus/digital).
0-40 [Hand ] Key on Keypad
Option:
[0] Disabled
* Enabled
[1 ]
0-41 [Off/Reset] Key on Keypad
Option:
[0] Disable Off/Reset
Enable Off/Reset
*
[1 ]
[2] Enable Reset Only
0-42 [Auto ] Key on Keypad
Option:
[0] Disabled
Enabled
*
[1 ]
4.1.5. 0-5* Copy/Save
0-50 Keypad Copy
Option:
[1] All to Keypad
[2] All from Keypad
[3] Size indep. from Keypad Copy non motor size dependent data from Keypad to frequency converter
0-51 Set-up Copy
Option:
* No Copy
[0 ]
[1] Copy from Set-up 1
[2] Copy from Set-up 2
[9] Copy from Factory Set-
up
4.1.6. 0-6* Password
0-60 (Main) Menu Password
Range:
Function:
Hand key has no function.
Hand key is functional.
Function:
Off/reset key has no function.
Stop signal and reset of any faults.
Reset only. Stop (Off) function is disabled.
Function:
Auto key has no function.
Auto key is functional.
Function:
The detachable Keypad of the frequency converter can be used for storing setups, and thus for transferring data when
moving parameter settings from one frequency converter to another.
NB!
Keypad Copy can only be activated from the Keypad and ONLY when the motor is coasted.
Copy all setups from the frequency converter into the Keypad.
Copy all setups from Keypad to frequency converter.
Function:
Use this function to copy a set-up content into the Edit Set-up.
In order to be able to make a set-up copy ensure that
• the motor is coasted
• par. 0-10, Active Set-up, is set to either Set-up 1 [1] or Set-up 2 [2]
NB!
The keyboard/parameter database are blocked while Set-up Copy is running.
Copy function is inactive
Copy from Set-up 1 to edit set-up chosen in par. 0-11, Edit Set-up.
Copy from Set-up 2 to edit set-up chosen in par. 0-11, Edit Set-up.
Copy from Factory Settings to edit set-up chosen in par. 0-11, Edit set-up.
Function:
Use password for protection against unintended change of sensitive parameters, eg. motor parameters.
Password protected parameters can always be read, but cannot be edited without entering the password.
AF-60 LP™ Micro Drive Programming Guide
4
13