Related Manuals for Sennetech SCT-1034
Summary of Contents for Sennetech SCT-1034
- Page 1 SCT-1034 CAMERA CONTROL CODE TRANSLATOR ERNITEC RS-485 TO BOSCH BIPHASE Ver. 1.0 www.sennetech.net Sennetech, Inc. 6455 W. Bath Rd. Perry, MI 48872 U.S.A. Ph (517) 675-1150 Fax (517) 675-1151 SCT-1034 Ver. 1.0...
- Page 2 PRODUCT DESCRIPTION The SCT-1034 is an Ernitec to Bosch control code translator designed to permit control of Bosch cameras from Ernitec VIP-1500 controllers. It receives Ernitec RS-485 commands and transmits the appropriate commands in Bosch biphase format. There are four independent biphase outputs.
- Page 3 1 2 3 4 5 6 7 8 SW1-1 BIPHASE CODE TYPE ON: VARIABLE SPEED OFF: FIXED SPEED Set to ON if the receivers can accept variable speed biphase code Set to OFF for older receivers that only recognize fixed speed commands SCT-1034 Ver. 1.0...
- Page 4 INSTALLATION REAR PANEL POWER ERNITEC BIPHASE DATA OUTPUTS RS-485 IN 12V to 15V AC or DC Power Bosch biphase Ernitec input RS-485 input outputs Connect to the + and - lines The four outputs are identical. Connect to the Bosch receiver from the Ernitec controller biphase + and - lines S = shield (optional)
- Page 5 Each time one of those Aux buttons is pressed, a small change is made to the associated speed. Aux 3 Decrease tilt speed Aux 4 Increase tilt speed Aux 5 Decrease pan speed Aux 6 Increase pan speed SCT-1034 Ver. 1.0...
- Page 6 March 2003 SCT-1034 Ver. 1.0...
Need help?
Do you have a question about the SCT-1034 and is the answer not in the manual?
Questions and answers