PRODUCT DESCRIPTION The SCT-1060 is a Bosch biphase to Panasonic code translator designed to permit control of Panasonic receivers from Bosch controllers. It receives Bosch biphase code and transmits the appropriate commands in Panasonic RS-485 format. There are four independent Panasonic out- puts.
GROUP 24 OFF OFF OFF ON GROUP 25 OFF OFF ON GROUP 26 OFF ON OFF ON GROUP 27 OFF ON GROUP 28 OFF OFF ON GROUP 29 OFF ON GROUP 30 OFF ON GROUP 31 GROUP 32 SCT-1060 Ver. 1.2...
INSTALLATION REAR PANEL POWER BIPHASE PANASONIC DATA OUTPUTS INPUT 9V to 15V AC or DC Bosch Connect output(s) to Power biphase Panasonic receiver input input RS-485 terminals. + to B (Yellow wire) - to A (Green wire) FRONT PANEL Power CODE TRANSLATOR Biphase Power...
Page 5
[Off] [2] Stop Auto Pan [On] [3] ALC On [Off] [3] Manual Iris [On] [4] Auto Focus On [On] [16] Increase Auto Pan Speed [Off] [16] Decrease Auto Pan Speed [On] [43] AGC On [Off] [43] AGC Off SCT-1060 Ver. 1.2...
ADDRESS GROUPS of 32 Group 1 Group 2 Group 3 Group 4 Group 5 Group 6 Group 7 Group 8 Group 9 Group 10 Group 11 Group 12 Group 13 Group14 Group 15 Group 16...
Need help?
Do you have a question about the SCT-1060 and is the answer not in the manual?
Questions and answers