Termopid Functioning And Programming (Excluding Model 0960 Carola) - Quick MILL MILANO 0980 Operating Instructions Manual

3. TERMOPID FUNCTIONING AND PROGRAMMING
(excluding model 0960 CAROLA)
Through one of the TermoPID models mounted, it is possible to adjust the
temperature of the machine boilers.
To set the temperature, proceed as follows.
Set-point temperature programming
To access the set point temperature adjustment programming, proceed as
follows:

With the termopid enabled (on), press the

When the display shows "t1" press the
t2".

When the display shows the required set point "t1 or t2" press

The display will show the set point temperature entered; it is then possible
to modify the value of the temperature required with the

3 seconds after the pressing of the last key, the data is stored and the
display will show the current temperature.
▼ ▲
and keys simultaneously.
▼
key to scan the set points "t1 or
70
▲.
▼ ▲
and keys.
Ita
lia
no
D
eu
tsc
h
En
gli
sh
Fr
an
ça
is