Quick MILL MILANO 0980 Operating Instructions Manual page 46

TermoPID see the section "
Coffee brew
1. Remove the filter (c) holder from its seat, turning it clockwise.
2. Fill the filter with one or two doses of coffee (according to the filter
inserted).
3. Press the coffee with the presser.
4. Place the filter holder to its seat, turning it anti-clockwise.
5. Place the cups under the corresponding outlets under the filter holder.
6. Lift the coffee delivery lever (b) after a few seconds the coffee brew starts.
When the desired amount of coffee has been delivered, lower the group
lever.
It is recommended to be very careful of the machine hot parts, especially
the delivery group and the steam pipe. Never place the hands under
the steam pipe and/or the group when carrying out the relevant
operations.
Steam delivery
Open the tap (d) and discharge a little steam into the drip tray then immerse the
steam wand in the liquid to be heated and open the tap (d), when the required
temperature is reached, close the tap.
After heating the beverage, discharge a little steam from the pipe to
clean the spray holes.
Hot water delivery
1. Place a container to collect the water under the hot water distributor (g).
2. Open the water tap (f) to deliver the hot water
3. When the required level is reached close the water tap.
P
TERMO ID SETTING AND FUNCTIONING
46
".
Ita
lia
no
D
eu
tsc
h
En
gli
sh
Fr
an
ça
is