Quick MILL MILANO 0980 Operating Instructions Manual page 57

Ita
lia
no
It is recommended to be very careful of the machine hot parts, especially the
delivery group and the steam pipe. Never place the hands under the steam pipe
D
and/or the group when carrying out the relevant operations.
eu
tsc
h
Steam delivery
1. Activate the steam delivery for a few seconds with the knob (d) and
En
discharge the condensation formed in the steam pipe into the drip tray (l)
gli
then close the steam delivery.
sh
2. Immerse about half the steam wand (e) in the brew to be heated, start the
steam delivery again with the knob. When the required temperature is
Fr
reached, close the knob.
an
ça
is
Hot water delivery
1. Place a container to collect the water under the hot water distributor, then
open the tap (f) and close it when the required water level is reached.
Standby/Economy function
The Standby/Economy is used to set the machine in a condition of low
conpumption by switching off the boiler heating resistor.
The machine automatically sets in Standby/Economy after 20 minutes if no
coffee is delivered.
When the machine is in Standby/Economy, the relevant LED (s) flashes every 2
seconds.
To exit from Standby/Economy, just deliver a coffee with the lever.
In machines with display, during delivery it is possible to see
the seconds count to check the extraction time.
It is advised, after heating the beverage, to always discharge a
little steam from the wand to clean the spray holes.
57