Mikroe Codegrip User Manual page 24

Set Filters
This button opens a new window, which contains five checkboxes, used to
manage the incoming SWO messages. There are three message categories,
depending on the SWO port they are sent through: Info, Warning, and Error
messages. When the specific checkbox is ticked, messages corresponding
to that category will be displayed.
The categories are color-coded. Info messages are displayed with the light
blue letters, Warning messages are displayed using the yellow color, while
the Error messages are displayed in red.
The Default category is used to manage messages sent over any other
SWO port that is not either Info, Warning, or Error port. These messages
are displayed in grey color.
The last checkbox labeled as Port is used to show or hide the port number
and the category of the specific incoming message. If multiple messages
are received over the same port, the port number and the category
message will be displayed only before the first message, respecting the
previously explained color coding scheme.
N O T E To use the SWO Tracing, the programming protocol must be set
to SWD. Not all ARM® MCUs support the SWO Trace. For more
information about the SWO Trace capabilities, please consult the
datasheet or the reference manual of the used MCU.
5.1.3 Options
The Options Menu item displays a set of options, which are used to select
and configure the target MCU.
C O D E G R I P U S E R M A N U A L