Crankcase Cover Removal/Installation - Honda GP160H Manual

dummyhead dummyhead
CRANKCASE COVER
REMOVAL/INSTALLATION
Drain the engine oil (page 3-3).
DOWEL PIN (2)
OIL FILLER CAP
(With oil level gauge)
OIL FILLER CAP PACKING
CHECK:
Replace if necessary.
CRANKSHAFT BEARING (6205)
CRANKCASE COVER
INSTALLATION:
Be careful not to damage the oil seal lips.
Clean the mating surface and apply a bead (2.0 – 2.5 mm (0.08 – 0.10 in))
of liquid sealant (ThreeBon d®
Install the cover within 3 minutes after application. Pouring the engine oil is
performed after 30 minutes have elapsed from assembling.
GP160H
CRANKCASE
KEY (If equipped)
OIL FILLER CAP
OIL FILLER CAP
PACKING
CHECK:
Replace if necessary.
OIL SEAL
CRANKCASE COVER BOLT (8 x 32 mm) (6)
24 N·m (2.4 kgf·m, 18 lbf·ft)
1216E or equivalent) as shown.
GP200H
(Lips)
13-3