Sony DCR-IP5/IP7BT Operating Instructions Manual page 96

Making your own titles
To return to the FN screen
Select , then press the center z on the control button after step 9. The PAGE2 screen
appears. Next, select EXIT, then press the center z on the control button.
To change the title you have stored
In step 5, select CUSTOM1 SET or CUSTOM2 SET, depending on which title you want
to change, then press the center z on the control button and then enter a new title as
desired.
If you take 5 minutes or longer to enter characters in standby mode while a
cassette is in your camcorder
The power automatically goes off. The characters you have entered remain stored in
memory. Set the POWER switch to OFF (CHG) once and then to CAMERA again, then
complete your title.
We recommend setting the POWER switch to VCR or removing the cassette so that
your camcorder is not automatically turned off while you are entering title characters.
To erase the title
Select C, then press the center z on the control button. The last character is erased.
To enter a space
Select c, then press the center z on the control button.
To enter the same character on the same button in succession
Select c, then press the center z on the control button to move the cursor to the next
position, and enter the character.
96