Sony DCR-IP5/IP7BT Operating Instructions Manual page 148

Playing back images in a continuous loop – SLIDE SHOW
To stop the slide show
Select
To pause during a slide show
Select PAUSE, then press the center z on the control button.
To return to the FN screen
Select
appears. Next, select EXIT, then press the center z on the control button.
To start the slide show from a particular image
Select the desired image by selecting –/+ before step 5.
To view the recorded images on the TV screen
Connect your camcorder to a TV with the A/V connecting cable supplied with your
camcorder before operation.
If you change the "Memory Stick" during operation
The slide show does not operate. If you change the "Memory Stick," carry out the
procedure again from the beginning.
To play the slide show with the screen indicators turned off
After step 5, press DISPLAY to turn off the screen indicators. You can start/pause the
slide show using MEMORY PLAY on the Remote Commander. To end the slide show,
press DISPLAY again, next, select
button.
When there are no images on the "Memory Stick"
The message "
148
END, then press the center z on the control button.
END, then press the center z on the control button. The PAGE1 screen
NO FILE" appears.
END, then press the center z on the control