Recording A Program - Sony DCR-IP5/IP7BT Operating Instructions Manual

Recording a program

When using the A/V connecting cable
You can record or edit a program from another VCR that has video/audio outputs. Use
your camcorder as a recorder.
1 Switching the video input jack of the A/V connecting cable
The supplied A/V connecting cable is equipped with an S video plug and a video plug.
You have to select one of the jacks in the menu settings. The default setting is VIDEO. If
the setup is not necessary, go to "2 Making a recording" on page 85.
(1) Set the POWER switch to VCR.
(2) Select FN, then press the center z on the control button. The PAGE1 screen
(3) Select MENU, then press the center z on the control button. The menu
(4) Select VIDEOINPUT via
(5) Select VIDEO or S VIDEO, then press the center z on the control button.
(6) Press DISPLAY to turn off the menu. Pressing DISPLAY again displays the
84
appears.
appears.
button.
video control buttons.
2
FN
3
MENU
4,5
VCR SET
VIDEOINPUT VIDEO
RETURN
, then press the center z or B on the control
VCR SET
VIDEOINPUT VIDEO
RETURN S VIDEO
6
1
POWER
CAMERA
MEMORY/
(CHG)
NETWORK
OFF
VCR
ON
MODE