Sony DCR-IP5/IP7BT Operating Instructions Manual page 60

Using the PROGRAM AE function
(1) In standby or MEMORY (DCR-IP7BT only) mode, select FN, then press the
(2) Select MENU, then press the center z on the control button. The menu
(3) Select PROGRAM AE via
(4) Select a desired PROGRAM AE mode, then press the center z on the control
(5) Press DISPLAY to turn off the menu. The PROGRAM AE mode indicator
To return to the FN screen
Select
PAGE1 screen appears. Next, select EXIT, then press the center z on the control button.
To turn the PROGRAM AE function off
Set PROGRAM AE to AUTO in the menu settings in step 4.
Notes
•Because your camcorder is set to focus only on subjects in the middle to far distance in
these modes, you cannot take close-ups in the following modes:
– Spotlight
– Beach & ski
•Your camcorder is set to focus only on distant subjects in the following modes:
– Sunset & moon
– Landscape
60
center z on the control button. The PAGE1 screen appears.
appears.
button.
button.
appears at the lower-left corner on the screen.
1
2
MENU
3,4
RETURN, , then press the center z on the control button after step 4. The
, then press the center z or B on the control
FN
MANUAL SET
PROGRAM AE AUTO
P EFFECT SPOTLIGHT
WHT BAL PORTRAIT
AUTO SHTR BEACH&SKI
RETURN SUNSETMOON
LANDSCAPE
LOW LUX
5
MANUAL SET
PROGRAM AE SPOTLIGHT
P EFFECT
WHT BAL
AUTO SHTR
RETURN