Dubbing Images Recorded On The "Memory Stick" Onto The Tape - Sony DCR-IP5/IP7BT Operating Instructions Manual

Dubbing images recorded on the
"Memory Stick" onto the tape
– DCR-IP7BT only
You can dub a still image or title recorded on a "Memory Stick" to a tape. You can also
use the Remote Commander to do this operation.
Before operation
•Insert a tape to be recorded into your camcorder.
•Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to VCR.
(2) Locate the desired recording start point of the tape, then stop the tape.
(3) Select
image you want to dub by selecting –/+.
(4) Select FN, then press the center z on the control button. The PAGE1 screen
appears.
(5) Select PAGE3, then press the center z on the control button. The PAGE3
screen appears.
(6) Select q REC CTRL, then press the center z on the control button. The q
REC CTRL appears.
(7) Select REC START, then press the center z on the control button. The
camcorder starts dubbing. To pause the dubbing, select REC PAUSE, then
press the center z on the control button.
(8) When you try to dub another image, select –/+, then press the center z on the
control button and carry out step 7.
4
FN
PB, then press the center z on the control button. Next, select the still
5 6,7
PAGE3
1
26/26
REC CTRL MEMORY PLAY
RET.
100–0026
– +
REC REC
PAUSE START
POWER
CAMERA
MEMORY/
(CHG)
NETWORK
OFF
VCR
ON
MODE
0:00:07
REC CTRL MEMORY PLAY
RET.
100–0026
– +
REC REC
PAUSE START
143