Sony DCR-IP5/IP7BT Operating Instructions Manual page 134

Superimposing a still image in a "Memory Stick" on a moving
picture – MEMORY MIX
Items to adjust
M. CHROM
M. LUMI
C. CHROM
M.OVERLAP
The fewer bars there are on the screen, the stronger the effect.
To change the still image to be superimposed
Before step 7, select –/+ in the lower-right corner, then press the center z on the control
button.
To cancel MEMORY MIX
Before step 7, select
Notes
•You cannot use the memory mix function using a moving image. If you select a
moving image file, the black thumbnail image appears.
•When you try to mix a moving file image recorded on a "Memory Stick," the message
"
•When the overlapping still image has a large amount of white, the thumbnail image of
the picture may not be clear.
•You cannot reselect the mode. Select
button again to return to PAGE1.
The "Memory Stick" supplied with your camcorder stores 20 images
– For M. CHROM: 18 images (such as a frame) 100-0001~100-0018
– For C. CHROM: two images (such as a background) 100-0019~100-0020
Sample images
Sample images stored in the "Memory Stick" supplied with your camcorder are
protected (p. 149).
Image data modified with a computer or shot with other equipment
You may not be able to play them back such image data with your camcorder.
To record a still image without any effects on a tape
Select –/+ on the lower-left corner, then press the center z on the control button to
increase the bars to maximum in the M. LUMI mode in step 6.
Note on M.OVERLAP
Once you select M.OVERLAP, you cannot reselect a still image. If you select another
image, select
M.OVERLAP before step 7 and select another image.
When you press the PHOTO button in step 9
You can record a still image on the tape.
134
The color (blue) scheme of the area in the still image which is to be swapped
with a moving picture
The color (bright) scheme of the area in the still image which is to be
swapped with a moving picture
The color (blue) scheme of the area in the moving picture which is to be
swapped with a still image
No adjustment necessary
OFF, then press the center z on the control button.
NOT REC" appears and you cannot mix the moving file image onto the tape.
OFF, then press the center z on the control button to release
OFF, then press the center z on the control