Sony DCR-IP5/IP7BT Operating Instructions Manual page 32

Recording a picture
Adjusting the brightness of the LCD screen
When recording in bright conditions, set the LCD BACKLIGHT switch to OFF.
(1) In CAMERA, MEMORY (DCR-IP7BT only), playback, or playback pause
(2) Select PAGE2, then press the center z on the control button. The PAGE2
(3) Select LCD BRT, then press the center z on the control button. The screen used
(4) Select –/+, then press the center z on the control button repeatedly to adjust
(5) Press DISPLAY to clear the screen buttons.
1
OPEN
To return to the FN screen
Select
screen appears. Next, select EXIT, then press the center z on the control button.
When FN is not displayed on the screen
Press DISPLAY or z so that FN is displayed. You can also use DISPLAY on the Remote
Commander.
32
mode, select FN, then press the center z on the control button. The PAGE1
screen appears.
screen appears.
for adjusting the brightness of the LCD screen appears.
the brightness.
– : to dim
+: to brighten
You can also adjust the brightness by pressing b/B repeatedly after you select
–/+.
2
PAGE2
FN
5
OK, then press the center z on the control button after step 4. The PAGE2
3,4
LCD
BRT
OK
– +
LCD BRT
LCD BRT bar