Sony DCR-IP5/IP7BT Operating Instructions Manual page 57

Using special effects – Digital effect
(1) In CAMERA mode, select FN, then press the center z on the control button.
The PAGE1 screen appears.
(2) Select PAGE3, then press the center z on the control button. The PAGE3
screen appears.
(3) Select DIG EFFT, then press the center z on the control button. The DIG EFFT
screen used for selecting the desired digital effect mode appears.
(4) Select the desired digital effect mode, then press the center z on the control
button. In STILL and LUMI. modes, the still image is stored in memory.
(5) Select –/+, then press the center z on the control button repeatedly to adjust
the effect. You can also adjust the effect by pressing b/B repeatedly after you
select –/+.
Items to be adjusted
STILL
FLASH
LUMI.
TRAIL
SLOW SHTR
OLD MOVIE
(6) Press DISPLAY to turn off the screen buttons.
1 2
PAGE3
FN
6
The rate of the still image you want to superimpose on the moving
picture
The interval of flash motion
The color scheme of the area in the still image which is to be swapped
with a moving picture
The vanishing time of the incidental image
Shutter speed. The larger the shutter speed number, the slower the
shutter speed.
No adjustment necessary
3–5
DIG
DIG EFFT
EFFT
SLOW
SHTR
STILL
OFF OK
OLD
MOVIE
FLASH LUMI. TRAIL
This bar appears when the STILL,
FLASH, LUMI., or TRAIL mode is
selected.
DIG EFFT
OFF OK
– +
LUMI.
57