Sony DCR-IP5/IP7BT Operating Instructions Manual page 111

Using a "Memory Stick" – introduction
Using a button displayed on the screen
Your camcorder has operation buttons on the screen. Use the control button to operate
the buttons on the screen.
(1) Set the POWER switch to MEMORY.
(2) Press OPEN to open the LCD panel. Operation buttons appear on the LCD
screen. You can switch the memory playback/memory camera modes by
selecting PLAY/CAM.
(3) Select FN, then press the center z on the control button. The PAGE1 screen
appears. Operation buttons appear on the screen.
(4) Select PAGE2, then press the center z on the control button. The PAGE2
screen appears. Operation buttons appear on the screen.
(5) Select PAGE3, then press the center z on the control button. The PAGE3
screen appears. Operation buttons appear on the screen.
(6) Select a desired operation item, then press the center z on the control button.
Refer to the relevant pages for each function.
3–6
FN
In memory camera
mode
PAGE1 PAGE2 PAGE3
MENU
SELF PLAY INDEX EXPO–
TIMER
PAGE1 PAGE2 PAGE3
LCD PLAY INDEX
BRT
PAGE1 PAGE2 PAGE3 EXIT
VOL PLAY INDEX
EXIT
FOCUS
SURE
EXIT
2
In memory camera
mode
NETWORK
1
In memory playback
mode (still image)
–
PLAY INDEX FN
POWER
CAMERA
MEMORY/ (CHG)
NETWORK
OFF
VCR
ON
MODE
+
CAM INDEX FN
111