Playing Back A Tape With Digital Effects - Sony DCR-IP5/IP7BT Operating Instructions Manual

Playing back a tape with digital effects

During playback, you can process a scene using the digital effect function: STILL,
FLASH, LUMI., and TRAIL.
(1) In playback or playback pause mode, select FN, then press the center z on the
control button. The PAGE1 screen appears.
(2) Select PAGE2, then press the center z on the control button. The PAGE2
screen appears.
(3) Select DIG EFFT, then press the center z on the control button. The DIG EFFT
screen used for selecting the desired digital effect mode appears.
(4) Select the desired digital effect mode, then press the center z on the control
button.
In STILL or LUMI. mode, when the mode is selected, the picture being
displayed is stored in memory as a still image.
(5) Select –/+, then press the center z on the control button repeatedly to adjust
the effect. See page 56 for details on each digital effect mode.
(6) Press DISPLAY to turn off the screen buttons. Pressing DISPLAY again
displays the video control buttons.
1
FN
To return to the FN screen
Select OK, then press the center z on the control button after step 5. The PAGE2
screen appears. Next, select EXIT, then press the center z on the control button.
To cancel the digital effect function
Select OFF, then press the center z on the control button in step 4 or 5.
2
PAGE2
3–5
DIG
DIG EFFT
OFF
EFFT
STILL
6
OK
FLASH LUMI. TRAIL
69