Sony DCR-IP5/IP7BT Operating Instructions Manual page 52

Using the fader function
(1) When fading in [a]
(2) Select FADER, then press the center z on the control button. The FADER
(3) Select the desired fader mode, then press the center z on the control button.
(4) Press DISPLAY to turn off the screen buttons.
(5) Press START/STOP. The fader indicator flashes, then lights up. After the fade
1
2,3
To return to the FN screen
Select
screen appears. Next, select EXIT, then press the center z on the control button.
To cancel the fader function
Before pressing START/STOP, select
button.
Note
You cannot use the following functions while using the fader function, and vice versa.
– Digital effect
– Tape Photo recording
52
In standby mode, select FN, then press the center z on the control button. The
PAGE1 screen appears.
When fading out [b]
During recording, select FN, then press the center z on the control button. The
PAGE1 screen appears.
screen for selecting the fader mode appears.
The top of the selected button is indicated with a green bar.
in/out is carried out, your camcorder automatically returns to the normal
mode.
FN
FADER
OK, then press the center z on the control button after step 3. The PAGE1
FADER
OFF OK
NORM. MOSC. BOUN– MONO–
FADER FADER CE TONE
OFF, then press the center z on the control
5
4