Table of Contents
Advertisement
Detailed Descriptions: Wire Harness Colors and Functions
Main Input / Output Connector (11-pin connector)
These wires are listed in order of their placement in the harness connector.
1. WHITE – Parking Light Relay Output (Internal Relay Pin 30)
At its default setting, the WHITE wire supplies 12-Volt (+) or Ground (-) to the vehicle's park light wire based on the
connection of the relay input (WHITE/RED wire).
Verification: The vehicle parking light wire registers 12-Volt (+) or Ground (-) when the park lights are turned on.
Note: This wire can be programmed to perform the Trunk Release Output function by changing its options.
Bank 2, Feature 6 on page 8.
2. WHITE/RED – Parking Light Relay Input (Internal Relay Pin 87)
The WHITE/RED connects to vehicle 12-Volt (+) or Ground (-) to supply the relay output (WHITE wire).
Verification for default setting:
•
If the vehicle parking light wire registers 12-Volt (+) when the park lights are on, connect the WHITE/RED wire to a
constant 12-Volt (+) vehicle wire.
•
If the vehicle parking light wire registers Ground (-) when the park lights are on, connect the WHITE/RED wire to a
reliable vehicle ground source.
Note: This wire can be programmed to perform the Trunk Release Output function by changing its options.
Bank 2, Feature 6 on page 8.
21. DARK BLUE – Trunk Release Output (-)
At its default setting, the DARK BLUE wire connects to the vehicle trunk release wire or relay and supplies Ground (-)
when activated from the remote control.
Verification: The vehicle trunk release wire registers 12-Volt (+) or Ground (-) when the trunk release button is activated.
Note: This wire can be programmed to perform the Parking Lights Output function by changing its options.
Bank 2, Feature 6 on page 8.
4. WHITE/BLACK – Siren Output (+)
The WHITE/BLACK wire supplies 12-Volt (+) to power the siren. After mounting the siren, connect its BLACK wire to a
reliable ground source, and connect the BROWN wire to the siren's RED wire.
5. RED – 12-Volt Input (+)
The RED wire connects to the vehicle's primary 12-Volt (+) wire to power the system.
Verification: The power wire registers 12-Volt (+) at all times.
Note: Before making this connection, remove all module fuses until the system is completely connected.
6. BLACK – Ground Input (-)
The BLACK wire connects to a reliable vehicle ground (-) source to power the system.
Verification: The vehicle ground (-) source wire registers ground (-) at all times.
Note: Before making this connection, remove all module fuses until the system is completely connected.
2
1
2
3
4
See page 15 for the full system diagram.
5
6
7
8
9
10 11
Refer to
Refer to
Refer to
APS25Z_RevA_08/18
Hide quick links:
Advertisement
Table of Contents
